AFTERMARKET PARTS - Suzhou Deyuancheng auto parts.Co., Ltd

Steering gear

The function of the steering gear is to appropriately transform the steering torque and steering angle from the steering wheel (mainly deceleration and torque increase), and then output it to the steering rod mechanism to turn the car. Therefore, the steering gear is essentially a deceleration transmission device. There are many types of steering gears, such as rack and pinion type, recirculating ball type, worm crank finger-pin type, power steering gear, etc.

Engine crankshaft

The crankshaft is the most important component of the engine. It takes the force from the connecting rod and converts it into torque, which is output through the crankshaft and drives other accessories on the engine. The crankshaft is affected by the centrifugal force of the rotating mass, the periodically changing gas inertia force and the reciprocating inertia force, causing the crankshaft to be subject to bending and torsional loads.

Steering Pump

The function of the car's power steering pump is to assist the driver in adjusting the direction of the car and reduce the intensity of steering wheel steering. By adjusting the flow speed of the steering assist oil, it plays a power-assisting role, making it easier for the driver to turn the steering wheel and reducing the need for steering wheel steering. The intensity used reduces driving fatigue.

Engine Parts

Ball joint

The automobile ball joint is an important component in the automobile suspension system. It is usually installed between the wheel and the body or axle. Its main function is to ensure that the connection between the wheels and the body is stable and can rotate smoothly when the vehicle is driving. There is a ball joint inside the ball head so that the wheel can rotate freely within a certain range.

Control arms and wishbones

The automobile control arm is an important component of the automobile suspension system. Its core function is to effectively transmit various forces on the wheels to the body and ensure that the wheels move according to the predetermined trajectory. Through ball joints or bushings, the control arm achieves an elastic connection between the wheel and the body. It also needs to have sufficient stiffness, strength and service life to cope with various driving conditions.

Link stabilizer

High pressure fuel pump

Coil spring

The main function of a car coil spring is to cushion and maintain contact between the tire and the ground. The classification of coil springs includes compression type, tension type and torsion type, which are classified according to the load characteristics during operation. They can also be divided into cylindrical coil springs and variable diameter coil springs according to structural characteristics, with the latter mainly used to withstand compressive loads.

Fuel injector

Engine cylinder head

The cylinder head is a valve mechanism in an internal combustion engine. It is mainly used to close the upper part of the cylinder to form the combustion chamber. It also serves as a support for the camshaft, rocker arm shaft and intake and exhaust pipes. It is mainly used to suck air into the inside of the cylinder, and the spark plug The combustible mixed gas is ignited, driving the piston to do work, and the exhaust gas is discharged from the exhaust pipe.

Control arm rubber sleeve

Wipers